AWD Gymkhana Hoonicorn Drift Handling
20.244
162
20.244
162
By default this mod replaces the Banshee handling when you replace the handling.meta. If you would like to apply the handling to any other car; copy the code in the Hoonicorn_Handling text document and replace it with the existing code for that car in the handling.meta file. (MAKE SURE TO BACKUP YOUR FILES FIRST!)
See it in action: https://youtu.be/YoPoJIJMz5E
Hoonicorn Handling: The Hoonicorn handling mod was created by myself, I've done my best to emulate the handling of the AWD hoonicorn; it uses a 6-speed gearbox for more of a kick and greater control at low speeds. However, it does still pick up speed rather quickly and can hold a nice slide with angle and speed that could compete with any RWD drifter.
You can throw it into a corner with a lot of force and keep it under control, even some 180 negative entries and keep the power on using both the throttle and brakes to keep the wheels spinning, while momentum carries the car backwards.
It can be quite difficult to master and requires use of the handbrake, brakes, good countersteer and throttle control, so I recommend you use a controller.
Installation:
- Open Open IV 2.6.
- Go to update > update.rpf > common > data
- Enable edit mode and and copy the handling.meta file provided into this location.
Check out my Youtube and social media!
YouTube: https://goo.gl/u2o9FS
Twitter: http://goo.gl/TMfhTa
Instagram: http://goo.gl/PC60CE
Facebook: http://goo.gl/Kc8H3y
See it in action: https://youtu.be/YoPoJIJMz5E
Hoonicorn Handling: The Hoonicorn handling mod was created by myself, I've done my best to emulate the handling of the AWD hoonicorn; it uses a 6-speed gearbox for more of a kick and greater control at low speeds. However, it does still pick up speed rather quickly and can hold a nice slide with angle and speed that could compete with any RWD drifter.
You can throw it into a corner with a lot of force and keep it under control, even some 180 negative entries and keep the power on using both the throttle and brakes to keep the wheels spinning, while momentum carries the car backwards.
It can be quite difficult to master and requires use of the handbrake, brakes, good countersteer and throttle control, so I recommend you use a controller.
Installation:
- Open Open IV 2.6.
- Go to update > update.rpf > common > data
- Enable edit mode and and copy the handling.meta file provided into this location.
Check out my Youtube and social media!
YouTube: https://goo.gl/u2o9FS
Twitter: http://goo.gl/TMfhTa
Instagram: http://goo.gl/PC60CE
Facebook: http://goo.gl/Kc8H3y
Carregat per primera vegada: 10 de Setembre de 2015
Actualització més recent: 10 de Setembre de 2015
Últim descarregat: Fa 6 hores
48 Comentaris
By default this mod replaces the Banshee handling when you replace the handling.meta. If you would like to apply the handling to any other car; copy the code in the Hoonicorn_Handling text document and replace it with the existing code for that car in the handling.meta file. (MAKE SURE TO BACKUP YOUR FILES FIRST!)
See it in action: https://youtu.be/YoPoJIJMz5E
Hoonicorn Handling: The Hoonicorn handling mod was created by myself, I've done my best to emulate the handling of the AWD hoonicorn; it uses a 6-speed gearbox for more of a kick and greater control at low speeds. However, it does still pick up speed rather quickly and can hold a nice slide with angle and speed that could compete with any RWD drifter.
You can throw it into a corner with a lot of force and keep it under control, even some 180 negative entries and keep the power on using both the throttle and brakes to keep the wheels spinning, while momentum carries the car backwards.
It can be quite difficult to master and requires use of the handbrake, brakes, good countersteer and throttle control, so I recommend you use a controller.
Installation:
- Open Open IV 2.6.
- Go to update > update.rpf > common > data
- Enable edit mode and and copy the handling.meta file provided into this location.
Check out my Youtube and social media!
YouTube: https://goo.gl/u2o9FS
Twitter: http://goo.gl/TMfhTa
Instagram: http://goo.gl/PC60CE
Facebook: http://goo.gl/Kc8H3y
See it in action: https://youtu.be/YoPoJIJMz5E
Hoonicorn Handling: The Hoonicorn handling mod was created by myself, I've done my best to emulate the handling of the AWD hoonicorn; it uses a 6-speed gearbox for more of a kick and greater control at low speeds. However, it does still pick up speed rather quickly and can hold a nice slide with angle and speed that could compete with any RWD drifter.
You can throw it into a corner with a lot of force and keep it under control, even some 180 negative entries and keep the power on using both the throttle and brakes to keep the wheels spinning, while momentum carries the car backwards.
It can be quite difficult to master and requires use of the handbrake, brakes, good countersteer and throttle control, so I recommend you use a controller.
Installation:
- Open Open IV 2.6.
- Go to update > update.rpf > common > data
- Enable edit mode and and copy the handling.meta file provided into this location.
Check out my Youtube and social media!
YouTube: https://goo.gl/u2o9FS
Twitter: http://goo.gl/TMfhTa
Instagram: http://goo.gl/PC60CE
Facebook: http://goo.gl/Kc8H3y
Carregat per primera vegada: 10 de Setembre de 2015
Actualització més recent: 10 de Setembre de 2015
Últim descarregat: Fa 6 hores
@Niklasjunkey ur videos are good bro :)
@Miswrote thank you very much. The most of my friends says that my videos are awful.
Sry for my english, im german.
I'm Having some trouble installing the handling to other vehicles... for some reason GTA V does not register that I have replaced the handling of some vehicles. Could anyone assist me on this?
Would it work if i put this in the dominator files?
how do i install
@ExtraLvLz i guss
amazing video but handling control is diffucult :)
anyone know how to apply this to other cars ? sorry noob here lol
@jared2235 GTAV / Mods / Update / Update.rpf / Common / Data / and extract the handling.meta file to your desktop, then open with notepad or any other text editing program. Copy and paste the Hoonicorn handling text into what ever car you want. Save it, and then replace the handling.meta file with that one.
awesome thank you :D @7Nvte3
With the latest update this handling seems to no longer work like it used to, not exactly sure why but it seems the way cornering grip and traction loss/gain has changed. It's gotten much harder to control (take it from someone who has used this since it was released) in the sense that you can't really control the car in a long slide anymore, before you could enter/exit a drift with relative ease but now if you try to brake or release the gas the car does not slow down at all and you can't steer. Your car gets sent flying away sliding like butter in a hot pan.
Rockstar seems to actively try to ruin the good mods with their updates. I have been making my own handlings and modifying this one these past two years but with this latest update none of my handlings works like they used to (rally/drift/drag/casual handlings are all broken.)
NVM turned out to be another mod interfering with the handling of all vehicles as well as me forgetting to change drive force back to it's original value. Ignore the entirety of my previous comment, gosh I'm a fool sometimes.
hi @gtawiseguy can you plz drop me your email, i want to talk to you in inbox's
I used this handling mod for one day i felt like a legend next day crashing into every car https://youtu.be/sCir5vdcSMU
Lovin this mod! lol made quite a few vids so far heres one of them https://www.youtube.com/watch?v=LZLTGO6kgys
car mod in the vodeo ?
The mod doesn't work on the latest patch. It changes the settings in OpenIV but has no effect in game.
@7Nvte3 but how do i do this to addon cars? I have a hoonicorn installed as an addon car but idk how to change the handling for it cuz its not in the handling file thing.
Does anyone know the name of the Flash GT that is used in handling.meta? Would love use this with it.
where can I download this car?